Tag Archives: Chat

Skype for Business IM integration with Exchange 2016 OWA–Part 2

This article is a completion of Part 1, Click here to go to Part 1

Configuration Steps – Part 2

7. On Exchange: Enable OWA VD Instant Messaging
8. On Exchange: Enable Messaging on OWA Policy
9. On Exchange: Create Enterprise Application for Skype Pool.
10. On Exchange: Create new SettingOverride for Skype for Business.
11- Generate a new Certificate for Exchange IM
12. Assign the newly imported certificate to IIS Exchange Back End site
13. On Exchange: Restart the WebAppPool
14. Log out and sign back in to OWA to Check
15. Troubleshooting methods

    7- On Exchange Server: Enable OWA VD Instant Messaging

    Part of enabling IM integration between Exchange and SfB is to enable OWA Virtual Directory to allow this. The below cmdlet does the job for you on all your Exchange Servers

    From Exchange, Launch Exchange Management and run the following cmdlet

    Get-OwaVirtualDirectory | Set-OwaVirtualDirectory -InstantMessagingEnabled $true -InstantMessagingType Ocs

    clip_image001[6]_thumb

    8- On Exchange: Enable Messaging on OWA Policy

    Run the following to enable Messaging for Owa Policy

    Get-OwaMailboxPolicy | Set-OwaMailboxPolicy -InstantMessagingEnabled $true -InstantMessagingType Ocs

    clip_image001[6]_thumb[1]

    9- On Exchange: Create Enterprise Application for Skype Pool.

      From Exchange Management shell Run the following cmdlet

      Cd $exscripts

      .\Configure-EnterprisePartnerApplication.ps1 -AuthMetadataUrl “https://sbg-pool01.domain.com/metadata/json/1” -ApplicationType Lync

      The AuthMetadataUrl is going to be your local Skype for Business Pool URL. This URL should work in your Exchange server without any Certificate error. Meaning that the certificate assigned to your Skype for Business pool should already be imported to Exchange Servers to trust this URL.

      image_thumb[14]

        If your previous configuration is correct then you should see the “The Configuration has Succeeded” Message.

          10- On Exchange: Create new SettingOverride for Skype for Business.

          Notes:

          • To configure the same settings on all Exchange 2016 and Exchange 2019 servers in the Active Directory forest, don’t use the Server parameter.

          New-SettingOverride -Name “<UniqueOverrideName>” -Component OwaServer -Section IMSettings -Parameters @(“IMServerName=<Skype server/pool  name>”,”IMCertificateThumbprint=<Certificate Thumbprint>”) -Reason “<DescriptiveReason>” [-Server <ServerName>]

          The Thumbprint you use here will define if whether IM will work or not as this what secures the communication between Exchange and Skype. If you use the wrong certificate your Integration will fail and users wont be able to login to IM through OWA.

          11- Generate a new Certificate for Exchange IM

          IMPORTANT NOTE:

          In order for IM in OWA to work the certificate you will generate must have its common name set as mail.domain.com to match the configuration.

          Using Digicert tool on Exchange Server I will generate the CSR of the new certificate

          Click on Create CSR

          image_thumb[15]

          Choose SSL certificate type and make sure you choose Mail.domain.com as CN

          In the SANs type all of the involved servers (Skype for Business Frontends, Mailbox servers in FQDN and in Hostnames as in the screenshot below). and click on Generate

          image_thumb[16]

          • Go to your CA Server’s CertSRV URL and copy the CSR code there to generate the new certificate.
          • Import the new certificate to the current server, then export it in PFX format and import it to all the Exchange Servers you’re planning to use.

          image_thumb[18]

          • After importing the certificate I will verify that I can see the private key

          image_thumb[19]

          Click on the Details and copy the Thumbprint or from MMC right click the certificate > Properties give it a friendly name e.g. (IM) and then from Exchange Management shell you can copy the Thumbprint directly.

          Get-ExchangeCertificate | select thumbprint,friendlyName

          image_thumb[20]

          Now use the previous script to create the setting Override for OwaServer.

          Things you can change are in bold “Name, IM Servername Value, and the Thumbprint value”.

          New-SettingOverride -Name “IM Override” -Component OwaServer -Section IMSettings -Parameters @(“IMServerName=SBG-Pool01.domain.com“,”IMCertificateThumbprint= 28E4B1BA0F2FCB1535AF199F02A64EFC78367F2D“) -Reason “Configure IM”

          image_thumb[21]

          If you enter the server parameter to use a single server you can change that by using. Note that you must not use FQDN but rather only the server’s hostname.

          Get-SettingOverride | Set-SettingOverride -Server sbg-mx01,sbg-mx02

          image_thumb[22]

          This should generate an event ID 112 on Exchange servers involved in the deployment.

          clip_image001[9]_thumb

            12. Assign the newly imported certificate to IIS Exchange Back End site

            Once the certificate is in the server store, You will be able to easily find in from IIS and bind it to the Exchange Back End site.

            This is the most crucial step to get IM to work in OWA. Don’t worry about breaking up Exchange Sites or Powershell. If you have added Exchange Servers Hostnames and FQDNs in this certificate then you should be good.

            • Now Launch IIS
            • Click on Exchange Back End
            • Select Binding
            • Click on the 444 port and edit
            • Select the newly generated certificate that has the mail.domain.com as CN. (This certificate must also have all Exchange Servers hostnames and FQDNs set as SANs)

            image_thumb[23]

            image_thumb[24]

            Make sure you change the backend cert to the new on all the involved Exchange Servers.

            13. On Exchange: Restart the WebAppPool

            Restart-WebAppPool MSExchangeOWAAppPool

            image_thumb[25]

              14. Log out and sign back in to OWA to Check

              Log out of OWA and back in and check if you are able to Login to IM . It should normally sign you in automatically but in case of an error then you should see it.

              image_thumb[29]

              In case of an error you should see the following.

              image_thumb[27]

              If it works then you should see the presence

              image_thumb[28]

              15. Troubleshooting Methods

              If you follow the above steps correctly then it should work especially when applying the right certificate for your Exchange Back End IIS part however if you face an error then you should do the following steps to troubleshoot the error

              • Set the Eventlog for Instant Messaging on Exchange from Low to High

              Set-EventLogLevel -Identity “sbg-mx01\MSExchange OWA\InstantMessage” -Level High

              image_thumb[30]

              • Look in the following path for errors

              C:\Program Files\Microsoft\Exchange Server\V15\Logging\OWA\InstantMessaging

              • Check the Healthset of the OWA Instant Messaging.

              Get-ServerHealth -HealthSet OWA.Protocol.Dep -Server sbg-mx01 | Format-Table Name, AlertValue –Auto

              image_thumb[31]

              Get-MonitoringItemIdentity -Server sbg-mx01 -Identity OWA.Protocol.Dep | Format-Table Identity,ItemType,Name -Auto

                image_thumb[32]

                Ref

                https://docs.microsoft.com/en-us/exchange/plan-and-deploy/post-installation-tasks/configure-im-integration-with-owa?view=exchserver-2019

                https://docs.microsoft.com/en-us/exchange/high-availability/managed-availability/health-sets?view=exchserver-2019

                Skype for Business IM integration with Exchange 2016 OWA–Part 1

                The Story

                A good and detailed documentation is everything we need to implement any kind of project especially if it’s an integration between two different servers that perform different roles.

                And with PKI involved the complications multiply thus a good article write up is what we need.

                Previously I have tried a test lab with Skype for Business 2015/2019 IM Integration with Exchange 2016/2019 and the result was a complete failure and endless search for what’s missing to get IM to work from OWA?

                image

                ERROR

                Upon completion of the steps mentioned in Microsoft’s Official documentation and after restarting Exchange IIS or OWAAppPool you will see this when you try to login to OWA with your user

                There’s a problem with instant messaging. Please try again later.

                image

                MS Official Documentation

                In their Official documentation Microsoft says that the certificate in question must be trusted by all the servers involved meaning Skype for Business Frontend and Mailbox Servers.

                Meanwhile this is true, it still would not get the IM to login/work although it might drop the initialize event ID 112 in the event log.

                clip_image001

                Here is what MS says about the certificate.

                Exchange and Skype for Business integration requires server certificates that are trusted by all of the servers involved. The procedures in this topic assume that you already have the required certificates. For more information, see Plan to integrate Skype for Business Server 2015 and Exchange. The required IM certificate thumbprint refers to the Exchange Server certificate assigned to the IIS service.

                REF URL: https://docs.microsoft.com/en-us/exchange/plan-and-deploy/post-installation-tasks/configure-im-integration-with-owa?view=exchserver-2019#what-do-you-need-to-know-before-you-begin

                image

                Step by Step Deployment

                To do things the way that should get this to work, I will detail steps one by one so we can be sure to get the positive results we are all waiting for when dealing with Exchange and Skype for Business.

                Exchange IM URL 1: mail.domain.com

                Skype for Business Pool FQDN: SBG-Pool01.domain.com

                Autodiscover URL : Autodiscover.Domain.com

                Prerequisites

                1. For Default and Web Service Internal, Your Skype for Business Frontend Server/Pool must use a certificate that is generated from an internal CA which you can use later to generate Exchange’s IM Certificate.
                2. UCMA must be installed (Doesn’t matter if version 4 or 5) both are supposed to work with Exchange 2016.
                3. Local Certification Authority must already be deployed in the domain.

                Configuration Steps – Part 1

                1. On SfB: Set CsAuthConfiguration Autodiscover URL for Skype server to find Exchange Autodiscover
                2. On SfB: Get-CsSite to see what is the current site ID.
                3. On Exchange: Check AutodiscoverServiceInternalURI
                4. On SfB: Create new Partner
                5. On SfB: Create new Trusted Application Pool
                6. On SfB: Create new Trusted Application ID

                Configuration Steps – Part 2

                7. On Exchange: Enable OWA VD Instant Messaging
                8. On Exchange: Enable Messaging on OWA Policy
                9. On Exchange: Create Enterprise Application for Skype Pool.
                10. On Exchange: Create new SettingOverride for Skype for Business.
                11- Generate a new Certificate for Exchange IM
                12. Assign the newly imported certificate to IIS Exchange Back End site
                13. On Exchange: Restart the WebAppPool
                14. Log out and sign back in to OWA to Check
                15. Troubleshooting methods

                Prerequisites

                1- Update or Create Server Default and Web Service Internal Certificate for SfB Pool servers

                The certificate installed on the Skype for Business Pool Frontend servers must be generated from a local Certification Authority which can be trusted by Exchange Server services.

                The Certificate generated for Skype for Business pool as in the below screenshot is generated from my CA and includes the names of the servers:

                • Skype for Business Pool
                • Skype for Business Frontend FQDNs
                • Exchange Servers
                • Autodiscover FQDN
                • Lyncdiscover.domains.com
                • Lyncdiscoverinternal.domains.com
                • sip.domains.com
                • meet.domains.com
                • dialin.domain.com
                • External.domain.com

                image

                image

                2- UCMA must be installed

                On both Exchange and Skype for Business servers I already have UCMA 4.0 version installed, but if you don’t have it or have an older version then you can’t continue without it.

                image

                3- Make sure you have a Local Certification Authority deployed in your domain.

                Configuration Steps – Part 1

                1- On SfB: Set CsAuthConfiguration Autodiscover URL for Skype server to find Exchange Autodiscover

                For Skype for Business Server to find Exchange Autodiscover Service point and to be able to authenticate servers we’ll be using the below cmdlet

                This enables both servers to authenticate and share information when needed and without user’s interference.

                Set-CsOauthConfiguration -ExchangeAutodiscoverUrl https://autodiscover.domain.com/autodiscover/autodiscover.svc

                image

                image

                Ref:

                https://docs.microsoft.com/en-us/powershell/module/skype/set-csoauthconfiguration?view=skype-ps

                2- On SfB: Get-CsSite to see what is the current site ID.

                Getting a site ID will be useful for later use to setup the Trusted Application Pool.

                On Skype for Business Management shell. Type the following

                Get-CsSite

                So the Site ID is 1. I will keep this for later use

                image

                3- On Exchange: Check AutodiscoverServiceInternalURI

                Specify the AutodiscoverServiceInternalURI for internal Autodiscover service. Make sure it points to your public URL and certificate not the internal one otherwise your users will get a certificate error through Outlook and might cause IM chat not to work.

                The Cmdlet would be

                Get-ClientAccessService | Set-ClientAccessService –AutoDiscoverServiceInternalUri https://autodiscover.domain.com/autodiscover/autodiscover.xml

                image

                4- On SfB: Create new Partner Application

                On Skype for Business Server, Launch Management Shell and use this cmdlet to add Exchange as a trusted Application to the SfB topology.

                New-CsPartnerApplication -Identity Exchange -ApplicationTrustLevel Full -MetadataUrl “https://autodiscover.domain.com/autodiscover/metadata/json/1

                image

                5- On SfB: Create new Trusted Application Pool

                New-CsTrustedApplicationPool -Identity mail.domain.com -Registrar sbg-pool01.domain.com -Site 1 -RequiresReplication $false

                image

                6- On SfB: Create new Trusted Application ID

                From SfB Management Shell run the following cmdlet .

                New-CsTrustedApplication -ApplicationId OutlookWebAccess -TrustedApplicationPoolFqdn mail.domain.com -Port 5199

                image

                Finally

                clip_image001[4]

                Click on the link below for Part 2

                Skype for Business IM integration with Exchange 2016 OWA–Part 2

                Freely Monitoring your Servers with Google Chat App Notifications

                Monitoring:

                Monitoring is considered one of the most important process in today’s world of Technology. Most Datacenters have their private monitoring systems with automation tools that would trigger failover, or Disaster Recovery in case of downtime being noticed and this is extremely costly operation.

                What to Monitor?

                CPU Usage, Memory Consumption, I/O, Network, Disk Usage, Process etc. Server Monitoring also helps in capacity planning by understanding the server’s system resource usage.

                Other services can be monitored like Web Servers, FTP, Mail Servers or anything else if it’s publicly accessible.

                Using UPTimeRobot Monitoring

                image

                Uptime Robot Monitoring is a free-commercial service that has rich monitoring features where you can monitor your services/servers on 1 minute interval and get alerted by Email, SMS, Phone Apps e.g. (Telegram, Google Chat, or Skype).

                The Free version

                In the free version Monitoring you can add services based on ports and protocols or Servers. This might look limited to some but since it’s free of charge it can be very useful for small or startup companies with couple of servers.

                – Limited up to 50 Monitors.

                – No SMS.

                – Check interval is 5 mins.

                – Logs are not kept

                The Commercial Version:

                image

                In the commercial version you pay a small fee of 4.5$ a month, an you’d get the following:

                – Up to 50 Monitors.

                – 20 SMS.

                – Check interval is 1 mins.

                – Logs are kept for 2 years.

                Adding a Server to Monitor:

                After you create an account on UpTimeRobot.com you can easy add a site or a service to monitor right away and the monitoring will initiate after 5 minutes then it’ll report if the service,server you added is up or down.

                Click on + Add New Monitor

                image

                Next add the website, In my case i’ll add my own website and see how it works and then choose Google Chat (Since I already have the integration on).

                image

                Once ready, click on create monitor

                That should add the website directly into the List of monitored services:

                image

                If you click on the Monitor, you’ll get the stat figure of how long has your website been on/off

                image

                After waiting roughly 35 mins, I can see now that my website is up and running without any problem. The monitoring probe counts by milliseconds so you’ll be able to see if there’s any interruption in the connection to your website/server.

                image

                Integration with Google Chat

                Requirements:

                • Google Suit.
                • Google Admin Account
                • Create a Google Chat Room
                • Configure WebHooks

                The integration between Google chat and UpTimeRobot requires Google G Suits account

                I will login to my G account with admin user

                image

                image

                Next go to Chat admin console

                Login with your admin account to google admin Console and then go to this link

                https://chat.google.com/u/1/

                image

                Create a room, Call it UpTimeRobot

                image

                image

                Once Created, Click on the … dots next to Now

                image

                Now Configure WebHooks

                image

                Call this UpTimeRobotContact and save

                image

                This should create a URL for you, Something that looks like this! This

                https://chat.googleapis.com/v1/spaces/AAAAcUvSsqs/messages?key=AIzaSyDdI0hCZtE6vySjMm-WEfRq3CPzqKqqsHI&token=qSlBYydgUj2mqqC8o_DIDY_RqcMaiI%3D

                image

                Adding Members (To get notifications)

                On the right side Add People and Bots

                image

                Add a user to receive notifications once any server or service is down.

                image

                Once you add a user, you’ll notice that the admin user’s notification below saying he/she added a user to the Room.

                image

                Uptime Robot Configuration:

                In order for this to work we’ll have to finish the work on the UpTimeRobot portal

                Inside Uptime Robot, create a new alert contact in My Settings>Alert Contacts>Add new>Google Hangouts Chat using the previously created Hangouts Chat web-hook URL.

                image

                image

                image

                When we choose the Google Hangouts Chat, We will have to give the following:

                • Friendly name for the monitor.
                • Provide the webhook URL which was created previously.
                • You can add a custom message to identify something related to the monitoring.
                • Enable notifications for, You can choose to get notifications only when the site/service is up or down or both.

                image

                image

                After adding this, You need to download one or two apps to get alerts to your Cell Phone:

                • Google Chat
                • UPtime Robot

                image

                What do Alerts Look like?

                As soon as your system goes down, Google Chat will sends you a push notification to your phone, if you’re using UpTime Robot and you’re logged in to the account then you’ll get another identical notification at the same time indicating your system’s status if it goes down or back up.

                image

                Like this you can add up to 50 monitors including all kinds of services, ports, protocols.

                The notification also comes with an interesting tone so you could easily tell if the sound is for “System Down” or “System is up” kind of state.

                This has personally helped me keep my system up 24/7 and interfere whenever there’s any downtime noticed.

                I hope this article helps and in case you have any question please leave a comment or get in touch with me info@moh10ly.com

                References:

                https://blog.uptimerobot.com/new-feature-google-hangouts-chat-notifications/

                https://chat.google.com/u/1/