<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2531 " id="quads-ad2531" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>

<p>This guide will show you how to installing order to Install &#8220;Only&#8221; Trend Micro 11.0 on Exchange 2013 server</p>
<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2524 " id="quads-ad2524" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>

<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2526 " id="quads-ad2526" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>

<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2529 " id="quads-ad2529" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>




<p>You will have to make sure that before you install Trend Micro you have enough resources on the mail servers or Edge servers depending on where you are intending to install it.</p>



<p><strong>Prerequisites:</strong></p>



<ol class="wp-block-list"><li>You will need to install Windows IIS CGI role.</li><li>Net Framework 3.5</li><li>Trend Micro Setup.</li></ol>



<p>If you did not install CGI you will get the following error, so you must install it</p>



<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-4eeMAtejuVA/VN6QKq0I5II/AAAAAAAAM3o/sqXQF6fbsrU/s1600-h/clip_image001%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/GItGnqnRFzGhV7JyOdoUO_flMdeyhV33Qp-F-FjwYqNofuDtRJ3jb3fCmCRX8m-SVzNGP9DPM9bVDQYWq7V7HlRW9ozaWK9UFYw4FETooZnZJE529g=w572" alt="clip_image001"/></a> 

<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2530 " id="quads-ad2530" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>
 
</figure>



<p>To install it you will need to go to Add Roles and then choose and install it.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-e3l-hOtArck/VN6QMuo2W8I/AAAAAAAAM34/tg5ViFxo4Hk/s1600-h/clip_image002%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/UzIC8G1S0nQiEGh1UrY3n3e9UHrm_Jvzsz9DXaXedXiRHv46Iq8OvU--aJD611b-5EyJVUBTQYE9ewX45KzwJGqOto04vzIpCytn6XCCyAkQ85rEivkC=w673" alt="clip_image002"/></a></figure>



<p>If Net Framework 3.5 is not install the setup won&#8217;t proceed unless you do so and you will get the following error:</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-VMKEB-OkfZM/VN6QOsLGwUI/AAAAAAAAM4I/ly27qS6dsc0/s1600-h/clip_image003%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh5.googleusercontent.com/EOnbR5fipa1Z6fQxqssdnKtlUfKMtbNEeHR30cJ5eS2wLeFpPQ-oBvnuV-crSLeyhRUtvMBFKbs7aAuljodxxjeUdH8C1axMRS2gj2Lqc6R7foJmtO0o=w673" alt="clip_image003"/></a></figure>



<p>To install Net Framework 3.5 , you can use the wizard or you can use the Powershell but you&#8217;ll need to attach Windows Server ISO File to the VM or the physical machine.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-6_abO3zqVyI/VN6QQMxBiCI/AAAAAAAAM4Y/eVxPILuz9nY/s1600-h/clip_image004%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/rnGu6btYBqk7b2dFBqh3D5q4C1hRX-rGPAS9LCp_QVMRvgMjhO7PQ7zmV6SvvgXAl5SZxSqOujdCKswIrgHUQ5r8N8Ui6bPkih-Px4N6-N9tUga73w=w673" alt="clip_image004"/></a></figure>



<p>Setup will restart from the beginning</p>



<p>NetFrame work fails from the Server Manager</p>



<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-9ShwCLZAx4w/VN6QR3PX-zI/AAAAAAAAM4o/klEnx-P546c/s1600-h/clip_image005%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/5K9IJ-A3phZ-yp1Y9zjK6phHSDts9ob4aTuYzQhebUw0AcCCJXPXdK0b1HKcaxeAJ-kSdOvfdzDmHVhbjtD_AmXgeVGEt3o4aAtxeQMIAYXPo9_HLA=w673" alt="clip_image005"/></a></figure>



<p>Instead, I imported the Windows 2012 r2 server ISO into the VM and ran the powershell command line</p>



<p>Dism /online /enable-feature /featurename:NetFx3 /All /Source:D:\sources\sxs /LimitAccess</p>



<p>Where D is the ISO drive name where Windows is.</p>



<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-GFCaUsfw4dM/VN6QTWj9DyI/AAAAAAAAM44/A1WDwluQbvM/s1600-h/clip_image006%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh5.googleusercontent.com/wrdun8HsH5FFS8YCWqjLuFAdTkclguSOluyYfYdA_fMVw8rJEDA7E_y11C2tQaqzg3Es81xSXlFR62aDGNe_O4SB32O6HhoIwku1qyEuNKt3f5UoO1l1=w673" alt="clip_image006"/></a></figure>



<p>Restarted the Trend Micro Setup and the setup is working</p>



<p>I already have copied the setup files on my mailbox servers, in my scenario I have 2 mail box servers which I am going to install it on.</p>



<p>I will launch the setup and go through the following wizard</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-7MYTzasgaXE/VN6QU_QZJ4I/AAAAAAAAM5I/pTfjV_CNp68/s1600-h/clip_image007%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/Kv1JTXYGk3Ip65QwqKDUn8YB0Wp1cpxFWLNUEC_s5bGkLo17VpECgiS_wSIDorjy_7352WzkUUG_NtDW8sHAm0SJJsSKwf2i4Fq5cryuqqyafuBcJw=w572" alt="clip_image007"/></a></figure>



<p>As I mentioned earlier, I am planning to install it on Exchange 2013 Mailbox servers, so I will go ahead and choose Mailbox servers</p>



<figure class="wp-block-image"><a href="http://lh6.ggpht.com/-0jpjPHeOfcs/VN6QW4qM6HI/AAAAAAAAM5Y/Ex8_gN0o-aA/s1600-h/clip_image008%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/sP-52-ZknQm_eYUFoxSEIRt-MWMzfdzopi6GRIbFzc9xWz-tWcj0kwKx8Z_HlSNiRrc1gAc7L9q_QSlJwVNtcYwi-NJJ2v3iFF8gIsvO8MUxVIAwGsk=w572" alt="clip_image008"/></a></figure>



<p>I will click Browse and Add exchange servers and as in the following snapshot it&#8217;ll show me total server count</p>



<figure class="wp-block-image"><a href="http://lh6.ggpht.com/-76nUsVuT9h8/VN6QYicx7uI/AAAAAAAAM5o/KgNpOwy3Wk8/s1600-h/clip_image009%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/gRVejHmdwJUNfhGZ-HMVej0llcabOoR-iWkuZbMYa8iftSoE_bQv7V66FQqCBpe65qZr7xJ3bQuAmahAZePJf1e5fSzr_4o87ioSRVWOUJiSo3_RCq8=w572" alt="clip_image009"/></a></figure>



<p>Next I will type the Exchange Admin account which I used to setup Exchange with and login to the admin Center which is also a local admin.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-593gow8rEd8/VN6QabrgWPI/AAAAAAAAM54/mbM8Q6u4CQg/s1600-h/clip_image010%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/vlLMK1UZkzBEJtru7vXt9DDvZe-0eTNN8YF7wZrJFRXCu_KLGmhJ53PuyLmHKDLOsD7e5lV6Ol4buK9cbmezULtVzJFEflZ9ZOx0D9yI0ppqVPC2gg=w572" alt="clip_image010"/></a></figure>



<p>This is set by default so you will need to leave it as it is.</p>
<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2527 " id="quads-ad2527" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>




<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-pz6NQrX_iwg/VN6Qb59pDbI/AAAAAAAAM6I/F41ab4XPbgw/s1600-h/clip_image011%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/DQ5XBu06z4WuG-FEY1MqzdXzGh50DzkAHP2uOVY-1O1MbF3yte_nvtaDc0ieD_mP9sSzyB2jsyNc27yjfLADDPNh7ylINYAkS4l2btK1oEsiK3kfxUl7=w572" alt="clip_image011"/></a></figure>



<p>You can keep the following default settings or change the port in case it&#8217;s already used or enable SSL.</p>



<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-JK7d0sO7OAM/VN6QdxkLi3I/AAAAAAAAM6Y/pohBVK-ZIiA/s1600-h/clip_image012%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/NjcxP1IoLM63v_RKMgJrd1T0XMg_LSe39RKTbwe_KuZEStmYcCLxrrmUrLUw77yPEm15xtlTHqmhKW2495CDixJqOZVvonZbMBDZRgo_N5_EyNBj5A=w572" alt="clip_image012"/></a></figure>



<p>In my case I will enable SSL as well as it&#8217;s more preferable for security purposes.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-P2VTvM98Wg8/VN6QfmyeDaI/AAAAAAAAM6o/3hZTmQDnx4Y/s1600-h/clip_image013%25255B6%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh5.googleusercontent.com/hP-7tHT62NwT8vfHM3Qv813yNz0jng7JhAPRIFUw7JziAVrqWgyuen-b0sUcwOED7XZTlpe6l0yQ_Oz4BA5PMPlSkaHBeW9rZbSlbzo_iwLtZATuQnk=w572" alt="clip_image013"/></a></figure>



<p>Trend micro setup will check if there&#8217;s any previous instance on the target Mailbox server in order to check if it&#8217;s an upgrade or a fresh install.</p>



<figure class="wp-block-image"><a href="http://lh6.ggpht.com/-UVxtONUfztg/VN6QhUzGFjI/AAAAAAAAM64/BO7GFy-ac60/s1600-h/clip_image014%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/7NoI-OrHQKLKWn_b7y5AdlRoH2v_S_F7hg7OpOP21gOWfkRzY-9bE75AMjAOZyHGQfMTg2h3glRS1j6VSiLrS0on0NAe8LgEjngixkLgx4Vc2PWcRP8=w572" alt="clip_image014"/></a></figure>



<p>I have no proxy so I will proceed without it.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-MLDNXaoQESk/VN6Qi0YtUWI/AAAAAAAAM7I/VA6XfKjsHQ0/s1600-h/clip_image015%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/9F2jPe-6mbZTM6N3Hu9Zm7gr-sKDcn6YeTuFKkWbFTbt_H24vPyUXugO5EOxM4QG2cRDq4OXOaMvpFxuPcapMt-WBeGyOgQxG5WnejU6imQ761gzREyO=w572" alt="clip_image015"/></a></figure>



<p>I&#8217;m planning to ignore this now and register later, so you can provide the key if you already have it and want to register.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-nG1XHOicIso/VN6Qk0hyQXI/AAAAAAAAM7Y/C_DS8f4xm8I/s1600-h/clip_image016%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/fWJy0vM6-ys0sJfElZsYgaHc0fKhONLqnLnwSSLFcc4lN7SASOTm211V04uPhLoKW_Vq5mpBK5vETVOBmOo-DP6Os-VT_rYDJOLz_pDFCkb4MKF_EyU=w572" alt="clip_image016"/></a></figure>



<p>When you continue without activating the product you will get the following warning.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-KYfcTC_U_7U/VN6QmlB23sI/AAAAAAAAM7o/6uuPkIx3wKM/s1600-h/clip_image017%25255B5%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/LhhP50Dp_EecqnyQkhZoa6CEhQg3WBrRQQ46rVjiJ_52irfHnmt_mRCpNl4TLS0cOCS-MTiaZbfYmo0EpNGtg3Dpq1R1Z_CtFWJ6UvRGG-neWK6zjck=w572" alt="clip_image017"/></a></figure>



<p>Depending on if you wanna be useful or not, you can just to participate with this program or just ignore it.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-peEIA8DURgk/VN6QoUzwAXI/AAAAAAAAM74/AAjfwrdpIbY/s1600-h/clip_image018%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/HalgWhmaB49veY-BcCVx4KppxStCVSfZ6fGXGzJPXdmgNipepq9iXWSsQZdfSPiwRQ9rOhSYzQu-3N8x8FIZz17xB2f_crkUr4zkJej8eX-lj8ycQTo5=w572" alt="clip_image018"/></a></figure>



<p>In case you would like to direct or send all incoming spam messages to the user to take the decision him/her self you can choose to integrate with Outlook junk e-mail or integrate with End user&#8217;s quarantine. In this case incoming infected or suspicious mails will be delivered to the user&#8217;s Quarantine but can be restored from/with trend micro.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-u6F9uJ7foDw/VN6QqcWkrNI/AAAAAAAAM8I/PlW3UZ-EhZA/s1600-h/clip_image019%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/wRkWlTDIgSGXa1DT5kTRD06sZHNNsjSE6KMHNeBvdpRvfhc2msvfFCWP2UcoI4-ynpdj27MCdLVgpxk58b-211qU73tIEsLu7mhfClYiGJUgiaUlggY=w673" alt="clip_image019"/></a></figure>



<p>Trend Micro have also a control manager for centralized management, so if you have it you can configure it and manage all those scanmail from one location. If not then just click next</p>



<figure class="wp-block-image"><a href="http://lh6.ggpht.com/--lTvXPkfxhs/VN6QsHjrSNI/AAAAAAAAM8Y/re2R7RYvEJc/s1600-h/clip_image020%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/arJ7G_izXUQ-xw3C_IcUBO3qAAmpVjvbzZsg7NODqKRmv0X8JJx78dBPZHh-KM_JU60KUFadjwINI2M43DPkt02-G8bX3DmzUyR4pDeqZahfoiyqiQxQ=w572" alt="clip_image020"/></a></figure>



<p>Click browse and choose your domain in order to select the domain admin groups to manage the trend micro scan mail application.</p>



<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-nN183ztZQ-s/VN6Qt1zbtcI/AAAAAAAAM8o/4Volrk9cEU8/s1600-h/clip_image021%25255B5%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh5.googleusercontent.com/OUj5-g41uriaQYViU1tSDyWZui1xiWSBisK5Ktn-O0lSq-XWrqhUyfwTQ9PgFdQ3B4zvscwZktHaOnlOkwC8BA0Yx1FXYPdG3Fv2LLxpDy8fJK9xyxGZ=w572" alt="clip_image021"/></a></figure>



<p>All server details and configuration is going to be listed in the next snapshot.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-prqUGDKxOpg/VN6QvUTkYrI/AAAAAAAAM84/rM5JZgrWDEk/s1600-h/clip_image022%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/lEUmpARh6h8oI5r9F47x925p7Dzg2H5HZPhkIPI1ms8v3kM-TrHxSysZfbue5YJsgbp8G2-zz_Wwk7ixv4H6WftOMctIHzLY9-hOh-rlH2XfPKck4ZA=w572" alt="clip_image022"/></a></figure>



<p>And now installation should start.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-rI60SgPQdwQ/VN6QxfqTxiI/AAAAAAAAM9I/zSRcoRPLeT4/s1600-h/clip_image023%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/FiHgGDFWVLSixjRzBlTv6JjYGpbx9KZQHVv0EIRUfqYpIvmKEGRvX57txwXFQ575LeBKunLB7OvhUrcl4lG7l-CMtatd4QSxRYlibFitrajckVlYajs=w572" alt="clip_image023"/></a></figure>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-xNERQ965hUU/VN6QzBsJgII/AAAAAAAAM9Y/P8uZLA9-uvw/s1600-h/clip_image024%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh5.googleusercontent.com/RUEHZQxt7F-TGb783K-USYYZGhQQgewzln-DaAVS9AfsrzL4Z83QQFTy6AHV6PbBnmVrnM9mYtLQYOsbnRIfGfh3Md3TZXvchtgLBiqlzsV6Yr6UJIA=w572" alt="clip_image024"/></a></figure>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-wX9t64hRYmk/VN6Q0wkNdJI/AAAAAAAAM9o/xCu4_3YjpY4/s1600-h/clip_image025%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/HsEV-pWZCH-pH-UztKBcJRMoLZ15QC5r_-oZKRuJ1FS6ahGT9KzbVzANcHXwQsOd85-pI4aCY1frvSXfxEOjzF8PB0kcdVQdTYSgOjc7LFhFgbmbJu8=w572" alt="clip_image025"/></a></figure>



<p>The credentials to login might be standard but you could also try your domain admin which you have assigned during the setup to login to the portal.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-_ztfizxw-_o/VN6Q2-Ze-5I/AAAAAAAAM94/NI44nen5HUU/s1600-h/clip_image026%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/opBq0HU2SqOO-0Lfo3kgd2j7-sKnJLKl615Eq_K-pq2ygmKyFzPVa9csyXtnG6mOguus3SSKXZgPcVAGTnp7KZEis2lhvZO6M5SQVkhl_Yt1MIMKfw=w673" alt="clip_image026"/></a></figure>



<p>Any configuration that you do on the Mailbox server 1, you will have to re-do it on Server 2 since this is not centralized management.</p>



<figure class="wp-block-image"><a href="http://lh6.ggpht.com/-n4GnBLHhLeY/VN6Q4s4dKyI/AAAAAAAAM-I/B-PKaRuObXA/s1600-h/clip_image027%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh4.googleusercontent.com/V82aRZzaMQ-yYhjqNXKwNWCXjtjUlq-TjwsbX8Y4Pbdd9JYhK38qtz3f2ALQnoiM4OwmaUkFj1H7evmZfoVwh2wVjI6_p-s8WhVRakzw_E7Jdu4Wsig=w673" alt="clip_image027"/></a></figure>



<p>So first thing I&#8217;ll do is update the product to the latest version.</p>



<figure class="wp-block-image"><a href="http://lh3.ggpht.com/-JTeuFKMhSp8/VN6Q6cjPUJI/AAAAAAAAM-Y/Tp5o45csvHs/s1600-h/clip_image028%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/8z_C94ZBnRcjWvPUWposcSMNblWoQ0gy9K8wxwrQ3E1KTfIvLhuufTTAtlB_qgVA4jP0nTbrIqKOUpN0jw-7zcrSwyOPEXuwaFkzvRBjO-wfu2aoMQ=w673" alt="clip_image028"/></a></figure>



<p>After selecting the components to update click on Update and wait for the process to finish.</p>
<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2522 " id="quads-ad2522" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>




<figure class="wp-block-image"><a href="http://lh5.ggpht.com/-zBTXhnFG_Eo/VN6Q8C0qvMI/AAAAAAAAM-o/_KoyyWy_ryA/s1600-h/clip_image029%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh3.googleusercontent.com/aXnIOpeNdXytwTF5cMyOtjvJJg-DnL1fueTo0tLhWbiZ5879udTinoX42XKlfSwg13D6A4CavfJ-QMry39QCclgv-TQvzVxRNbKztK4CShz1FbGCd30n=w673" alt="clip_image029"/></a></figure>



<p>After setting and configuring couple of rules and restarting Exchange transport service on each server . I was able to test It and see that it works as in the following snapshot.</p>



<figure class="wp-block-image"><a href="http://lh4.ggpht.com/-SyodnqLpFcA/VN6Q-DkBWXI/AAAAAAAAM-4/BqdYwr72U6o/s1600-h/clip_image030%25255B4%25255D.png" target="_blank" rel="noreferrer noopener"><img src="https://lh6.googleusercontent.com/zf2Az55wCbB4v6Co9YYR03KtQAQHsgTx8lGY8SqqYcutufe_LG0nDFFi76I5EmUijqR8z7G1JtJ3yBoloCdL70kSUWDQ7ddmsoVO5ONtHDhDRGVegg=w673" alt="clip_image030"/></a></figure>
</p>
<!-- WP QUADS Content Ad Plugin v. 2.0.92 -->
<div class="quads-location quads-ad2525 " id="quads-ad2525" style="float:none;margin:0px 3px 3px 3px;padding:0px 0px 0px 0px;" data-lazydelay="0">

</div>


Reset and manage your Active Directory users' Passwords Active Directory is one of the most…
Finding Exchange Database hidden mailboxes. Story:Maybe you have been in this situation before, trying to…
If you're using a Proxy server in your firewall or in your network and have…
Story:I got some clients that have reported some of their users being locked out and…
Delegate Permissions This is a code that I have wrote recently to check if an…
Story: I got a request from a client who constantly gets CVs and have to…