Category Archives: Active Directory

Domain Controller Cross Forest migration Part 3 (ADMT Installation)

ADMT 3.2 installation

Requirements

  1. SQL express/full 2008 sp2
  2. Windows 2012/R2 / Windows 2008 R2 for ADMT
  3. Install PES on Source DC for Migrating Passwords

http://blogs.technet.com/b/askds/archive/2010/07/09/admt-3-2-common-installation-issues.aspx

  • The server where you install ADMT can run any supported version of Windows Server, including Windows Server 2012 R2 and Windows Server 2012.
  • The source and destination domain controllers must be writeable, but they can run any supported version of Windows Server with a user interface (not Server Core), including Windows Server 2012 R2 and Windows Server 2012.
  • The source and destination domains must be at Windows Server 2003 domain functional level or higher.
  • The computers that can be migrated can run any supported version of Windows, including Windows 8.1.
  • You can use any version of SQL Server for the ADMT database.

From <https://technet.microsoft.com/en-us/library/active-directory-migration-tool-versions-and-supported-environments(v=ws.10).aspx>

ADMT user permissions:

image

From <https://social.technet.microsoft.com/Forums/windowsserver/en-US/fe44cdd4-ef11-4d73-801d-f37939d756bd/minimum-permissions-needed-for-admt-32-when-doing-an-interforest-migration-with-sid-history?forum=winserverMigration>

ADMT Migration Account

The account you run ADMT under will need to have administrative rights in both the source and destination domain. You may decide to create a user specifically for the ADMT Migration, or you may use an existing user e.g. the default administrator account. I will create a user called ADMT and assign this user the correct permissions. This is the account we will use for the entire migration.

It is recommended that you make the user account in the destination domain and make it a member of the domain administrators group.

destination Domain:

clip_image001

In the source domain add the same user to the builtin administrators group (you will be unable to add it to the domain administrators group).

Source Domain:

clip_image002

Installing ADMT

You should install ADMT and SQL onto a member server in the destination forest. Use the ADMT service account explained in the previous post to install SQL and ADMT.

ADMT requires a preconfigured instance of SQL Server for its underlying data store, so we’ll go ahead and install SQL 2008 SP1 Express on ADMT.contoso.com

Installing SQL Express 2008 SP2

SQL Express download here: https://www.microsoft.com/en-us/download/details.aspx?id=30438

clip_image003
clip_image004
clip_image005
clip_image006

Cause

This error is purely within SQL Express 2008 and is not really to do with ADMT 3.2. The issue is fixed in “Cumulative update package 4 for SQL Server 2008”.

Unhelpfully, this error is identified in KB975055 as being only for Windows 7 and that it was fixed by SP1 – both incorrect. The issue does affect Win2008 R2 and is only fixed by the cumulative update.

Resolution

Before installing SQL Server Express 2008 with SP1 (which will fail), first install:

Cumulative update package 4 for SQL Server 2008 

http://support.microsoft.com/kb/963036

clip_image007
clip_image008
clip_image009
clip_image010
clip_image011
clip_image012
clip_image013
clip_image014

Set an account for the SQL service to run under (use your ADMT Service Account).

clip_image015

Set a SQL administrator, choose the user account you plan to run ADMT under- be aware that this user account will need to have local administrative rights in the source domain (this will be discussed further in the series).

clip_image016
clip_image017

Download ADMT 3.2

https://onedrive.live.com/redir?resid=82488EABA4ACDB15!33497&authkey=!AF3kLtU8fl2_B0I&ithint=file%2cexe

Installing ADMT

For this series I will be using ADMT 3.2, which is the supported version for Server 2008 R2. Use ADMT 3.1 for installation on a Server 2008 non-R2 server, or ADMT 3.0 for Server 2003. If you need to migrate a 2000 Domain Server, you will need to use ADMT version 3.1 or earlier.

Update Junes 2014 – ADMT 3.2 now supports Windows Server 2012 / 2012 R2.

clip_image018
clip_image019
clip_image020

Next you can leave the default value be used for the SQL installation. 

clip_image021
clip_image022

Since this is a new installation then I won’t need to be importing any data from a previous database and will continue with the normal options.

clip_image023
clip_image024
clip_image025

 The Installation of the ADMT tool is finished and next we’ll be preparing Permission in the next series and starting migration of users, Groups, Computers  and i’ll talk about the issues that I had during the migration. 

Domain Controller Cross Forest migration Part 2

Domain Controller Cross Forest migration Part 2

Mohammed Hamada 4:35 AM Active Directory , Windows Migration , Windows Server

Current environment on the LAB.com DC

  1. Additional DC2
  2. SCVMM
  3. SCVMM SQL
  4. Exchange
  5. SCMM
  6. SCMM SQL

Computers

clip_image001[7]

Migration plan

AD 2012 R2 (LAB.com) to (Contoso.com) 2012 R2.

Users

clip_image002[6]

In the second part of this series (DC cross forest migration) I will demonstrate some major required steps for the migration from the old DC (lab.com) to the new DC (Contoso.com)

NOTE:

SQL Servers and their applications can’t be migrated due to SQL permissions and Schema mismatch.

Requirements are :

Destination DC Forest Function and domain function level must be set to at least 2008 R2 for ADMT3.2 to work

clip_image002[4]

And a health check must be performed on the FSMO roles to make sure everything is functioning properly on the Source DC.. PDC, SchemaMaster..etc

The checks I will perform are

  1. Check replication (In case there’s more than one DC In the source forest).
  2. DC health (DCDiag tool)
  3. Check the reachability of the PDC.

Netdom query FSMO ( this command will show you which DC in the source forest holds the roles exactly)

clip_image001[5]

1- For Checking replication you can use the repadmin command line which checks replication between sites, DCS and reports any errors in between. in case you have one server in pace the following outcome should be printed for you.

Repadmin.exe helps administrators diagnose Active Directory replication problems between domain controllers running Microsoft Windows operating systems.

https://technet.microsoft.com/en-us/library/cc770963.aspx
image

2- Check DC health using DCDIAG tool

Analyzes the state of domain controllers in a forest or enterprise and reports any problems to help in troubleshooting

https://technet.microsoft.com/en-us/library/cc731968.aspx

as they are multiple types of tests that can be applied with dcdiag depending on the parameter used. I will start with the DNS.

image

If the DNS is healthy then it should show as following. and we can continue to the next test.

image

For an extensive test, you can use the parameter /v along with this sign >c:\dcdiag.txt to export the test to a file and look at it line by line.

image

If everything sounds good and healthy we shall move on to the next step which is DNS configuration

DNS Configuration

Preparation:

  1. DNS replication between both domains
  2. Installing Windows 2008 R2 for ADMT 3.2
  3. Setting up domain trust between forests.
  4. DNS replication between the source and target domain

In order for the trust to be created between both forests, you either have to create a conditional forwarders that will copy the source zones to the destination DNS server and vice versa or you can create a secondary forwarder zone in destination DC for the source DC and vice versa.

In my case I will go for creating a secondary zone and to do this I will go to each DNS server and allow Zone to be transferred.

Note:

You can include only the IPs of the Source and Destination servers in the zone transfer and any additional DNS servers.

clip_image003[7]

Now I a have created a secondary zone DNS and trying to resolve FQDNs from the source server as in the below snapshot.

clip_image004[7]

Same will be done on the destination server.

clip_image005[7]

Checking Name Resolution for both domains:

clip_image006[7]

Once the nslookup works as expected from both servers then we’ll ahead with creating forest trust between both DCs.

Creating Forest trust between Source and Destination Domain.

NOTE:

In order for the trust to be created between both source and destination domains the PDC on the Destination Domain must be available.

1. Open the Active Directory Domains and Trusts, right click on the domain and click properties.

clip_image011[4]
clip_image012[4]
clip_image013[4]
clip_image014[4]
clip_image015[4]
clip_image016[4]
clip_image017[4]
clip_image018[4]
clip_image019[4]
clip_image020[4]
clip_image021[4]
clip_image022[4]
clip_image023[4]
clip_image024[4]

We will have to validate trust after creating it to make sure that trust in both ways are validated.

clip_image025[4]
clip_image026[4]
clip_image027[4]

Now since trust is created and already validated both ways, we’ll have to add a GPO policy to update all clients with the new Domain name in the DNS suffix search list to resolve netbios names.

Updating DNS Suffix Search list:

DNS suffix search list:

In order to add the source and destination domains suffix to the dns suffix search list we will have to open GPO on the destination Domain (Contoso.com)

clip_image028[4]

On the target domain (contoso.com) we’ll have to open GPO .

Right Click on default domain policy / Edit

clip_image029[4]

Go to (Computer Configuration \ Policies \ Administrative Templates \ Network \ DNS client

Double click on the DNS Suffix Search list to open it and enable it.

clip_image031[4]
image

Click ok and apply the police and see how it should show in the report.

clip_image033[4]

Once this is done and policy is applied among all clients you should have no problem and it should show first on the DC where you applied the policy.

image

Domain Controller Cross Forest migration Part 1

In this series of articles I will demonstrate the Cross forest migration for Microsoft Windows Active directory 2012 R2.

Before starting any step, I will have to do a revision for the current environment and check what is there, what can be migrated and what can not be.

Revisions:

  1. Check if the environment is using an old cryptographic algorithms that’s not supported during the migration .e.g. (SHA-1 1024bit Certification authorities).
  2. Notice that Group Policy user profile folder redirection might have a bug from SCCM. To fix this the SCCM needs to be checked for one option needs to be disabled
  3. Under the SCCM Configuration manager,

– Select Administration

– Select Client Settings

– Pull up PROPERTIES of Default Client Settings configuration and click on Compliance Settings

From <http://blogs.technet.com/b/askds/archive/2013/12/13/an-update-for-admt-and-a-few-other-things-too.aspx>

– Enable User Data and Profiles mentioned above is the setting which drives the control of Folder Redirection and Remote User Profiles.

The above configuration by Default is set to NO. Once enabled (set to YES), it passes the control of Folder Redirection, Offline Files, and Remote User Profiles to WMI and stores this configuration under the registry path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\UserState\UserStateTechnologies\ConfigurationControls

TCP/IP crashes and errors: Hotfix released to correct a crash in TCP/IP.

Ref:

http://blogs.technet.com/b/askds/archive/2013/12/13/an-update-for-admt-and-a-few-other-things-too.aspx

Hardware Requirements

  1. Windows 2008 R2 DC on the destination forest.
  2. Windows 2012 R2 ADMT and SQL express 2008 R2 or 2012 R2 express or full.

Reference:

https://support.microsoft.com/en-us/kb/2753560

Software Requirements

1- Rights Management Services Analyzer Tool

From <http://www.microsoft.com/en-us/download/details.aspx?id=46437>

RMS Analyzer provides the following features:

• Support for Azure RMS and AD RMS diagnostics

• Prerequisite checks for Azure RMS integration (such as any required hotfixes, registry key settings, Microsoft Online Sign-In Assistant)

• Ability to collect trace logs to capture real-time problems

• Diagnostics and remediation for Office 2013 and Office 2010

• Basic diagnostics for federation services

• Group membership check, based on groups and policy templates

• Display of your RMS configuration settings and verification tests to validate service health for RMS

• Ability to monitor multiple servers and find all RMS servers in trusted forests

By installing and using the software you accept the License terms which are located in the zip folder download. If you do not accept the terms, do not install or use the software.

2- Password Export Server (PES) – x64

http://www.microsoft.com/en-us/download/details.aspx?id=46437

3- Active Directory Migration Tool (ADMT) QFE – x86